A fully glued floor ensures optimal heat transfer from the sub-floor through the wood. Due to the glueing, no insulating layers of air can form under this type of floor. The corresponding adhesive must be suitable for the use of heated screeds. At a room temperature of 20 to 22 degrees, the temperature of this floor should be around 24 degrees Celsius and an attempt should be made to keep the relative humidity at around 50 per cent. If these precautions are observed and the appropriate materials are selected, the combination of wooden surface that is warm to the feet and underfloor heating is ideal – not only for the feet but above all for the general well-being of people and animals label printing services in Red Wing.
The ideal humidity for a floor made of solid wood planks is around 50-65%. Particularly during the heating season, you should ensure that there is sufficient room humidity, otherwise, the boards will dry out and shrink. If, on the other hand, the floor is in a room that is too damp, the planks swell and bulge. To prevent cracks and joints as much as possible, you should store the planks in the respective room for at least 48 hours before laying so that they can acclimate.
A certain distance from the walls is necessary so that the wood has space to work. Therefore, always adhere to the expansion joint specified by the manufacturer.
Glued over the entire surface, wooden floorboards are suitable for underfloor heating. The thermal conductivity depends on the thickness of the boards. In wet areas, a wooden floor is only suitable if it is completely sealed.
Advantages and disadvantages of plank floors at a glance
Advantages
Natural and decorative
Durable
Positive indoor climate
Warm feet
Disadvantage
Joints and cracks possible
Room humidity must be kept as constant as possible
High construction height with substructure.
These are some disadvantages and advantages of hard wooden floors after detailed study one can decide whether to huy wooden floors or not. Every floor has some disadvantages but your purpose is what is important for decision making.
